Brother HL-1060 Series - Manual (Page 32)

CHAPTER 3 CONTROL PANEL
CHAPTER 3 –1
CHAPTER 3
CONTROL PANEL
LAMPS AND SWITCH
This section refers to the following lamps and switch on the printer control
panel.
Feeder
Drum
Alarm
Ready
Paper
Data
Toner
1 2
Feeder
Drum
Alarm
Ready
Paper
Data
Toner
1 2
Fig. 3-1 Lamps and Switch on Control Panel
✒ Note
When the power switch is off or the printer is in sleep mode, all lamps
including the Ready lamp are off.
Ready (Paper) Lamp
The Ready lamp indicates the current status of the printer.
Lamp Printer status
Off
❍
The power switch is off or the printer is in sleep
mode. If the printer is in sleep mode, it will wake up
automatically when it receives data or you press the
control panel switch.
Blinking
❍↔●
The printer is warming up.
(Blinking at 1 second intervals)
Blinking
❍↔●
The printer is cooling down and pauses printing
until the printers internal temperature is lowered.
(Blinking at 2 seconds intervals)
On
●
The printer is ready to print.
This lamp also works as the Paper lamp with the Alarm lamp. They blink
simultaneously to indicate a paper error. See
“Operator Calls” in Chapter 6.