Brother DCP-8085DN - Manual (Page 29)

22
3
Paper settings
3
Paper Type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
„ To set the paper type for the
MP Tray
press Menu, 1, 1, 1, 1.
„ To set the paper type for Tray#1
press Menu, 1, 1, 1, 2.
„ To set the paper type for Tray#2
1
press Menu, 1, 1, 1, 3 if you installed
the optional tray.
1
Tray#2 Only
or T2 appears only if the
optional tray is installed.
b
Press a or b to choose Thin, Plain,
Thick
, Thicker, Transparency or
Recycled Paper
.
Press OK.
c
Press Stop/Exit.
Note
You can choose Transparency for
Tray #1 and the MP Tray.
Paper Size
3
You can use ten sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5,
A5 L, A6, B5, B6 and Folio.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document.
a
Do one of the following:
„ To set the paper size for the
MP Tray
press Menu, 1, 1, 2, 1.
„ To set the paper size for Tray#1
press Menu, 1, 1, 2, 2.
„ To set the paper size for Tray#2
1
press Menu, 1, 1, 2, 3 if you installed
the optional tray.
1
Tray#2 Only
or T2 appears only if the
optional tray is installed.
b
Press a or b to choose A4, Letter,
Legal
, Executive, A5, A5 L, A6, B5,
B6
, Folio or Any.
Press OK.
c
Press Stop/Exit.
Note
• Legal, Folio and Any size appears only
when you choose the MP tray.
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A5 L and A6 size are not available for the
optional Tray#2.
General Setup
3