Brother DCP-8085DN - Manual (Page 35)

Chapter 4
28
Changing the password for
the administrator
4
a
Press Menu, 1, 6.
b
Press a or b to choose Set Password.
Press OK.
c
Enter the registered four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify: re-enter the
new password.
Press OK.
f
Press Stop/Exit.
Setting up public user mode
4
Public user mode restricts the functions that
are available for public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
a
Press Menu, 1, 6.
b
Press a or b to choose Setup ID.
Press OK.
c
Enter the administrator password.
Press OK.
d
Press a or b to choose Public.
Press OK.
e
Press a or b to choose Enable or
Disable
for Copy.
Press OK.
After you have set Copy, repeat this
step for Scan, USB Direct and
PC Print
.
Press OK.
f
Press Stop/Exit.