BenQ SP831 - Manual (Page 64)

64 Operation
System Setup menu
FUNCTION
(default setting /
value)
DESCRIPTION
Language
(English)
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 31 for details.
Splash
Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-
up. Three options are available: BenQ logo screen, Blue screen, or My
Screen.
My Screen Captures and stores the projected picture as My Screen. See "Creating your
own startup screen" on page 54 for details.
Projector
Position
(Floor Front)
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. See
"Choosing a location" on page 17 for details.
Blank Timer
(Disable)
Sets the picture blank time when the Blank feature is activated, once
elapsed the projector will restore the picture. See
"Hiding the picture" on
page 50 for details.
Auto Off
(Disable)
Prevents unnecessary projection when no signal is detected for a long
time. See
"Setting Auto Off " on page 68 for details.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3
hours.
Background
Color
(Blue)
Allows you to choose the color of the background screen that will be
displayed when there is no input signal detected.
Menu
Settings
Menu Display Time (15 sec)
Sets the length of time the OSD will remain active after your last key press.
The range is from 5 to 30 seconds in 5-second increments.
Menu Position (Center)
Sets the On-Screen Display (OSD) menu position.
Input Source
Selects an input source to be projected. See "Switching input source" on
page 35 for details.
Auto Source
Search
(On)
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires
a signal. If the function is not activated, the projector selects the last used
input source. The default value is 'Analog RGB'.