Lamp information, Getting to know the lamp hour, Extending lamp life – BenQ SP831 User Manual

Page 68: Getting to know the lamp hour extending lamp life, For detail, About lamp rest rate, 68 maintenance

Advertising
background image

68

Maintenance

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in
hours) of lamp usage is automatically calculated by the
built-in timer. The method of calculating the
equivalent lamp hour is as follows:
Equivalent lamp hour
= 1 (hours used in Economic mode) +4/3 (hours used
in normal mode)

See

"Setting Lamp Power as Eco."

below for more

information on Eco. mode.

To obtain the lamp hour information:
1.

Press MENU and then press /

until the

Advanced Setup menu is highlighted.

2.

Press

to

highlight

Lamp and press ENTER. The

Lamp page displays.

3.

Highlight Lamp Hours and press ENTER to
display the Lamp Hours information page.

4.

To leave the menu, press MENU.

About Lamp Rest Rate:

Lamp Rest Rate shows the percentage of the lamp rest
life. The method of calculating the rate is as follows:
Rest Rate = [1 - (Total Lamp Hours /4000)] x 100%

Extending lamp life

The projection lamp is a consumable item that normally
can last up to 3000-4000 hours with proper usage. To
keep the lamp life as long as possible, you can do the
following settings via the OSD menu.

Setting Lamp Power as Eco.

Using Eco. mode reduces system noise and power
consumption by 20%. If the Eco. mode is selected, the
light output will be reduced and result in darker
projected pictures.
Setting the projector in Eco. mode also extends the lamp timer automatic shutdown feature.
To set Eco. mode, go into the Advanced Setup > Lamp > Lamp Power menu and press /

.

Setting Auto Off

This function allows the projector to turn off automatically if no input source is detected
after a set period of time.
To set Auto Off, go into the System Setup > Auto Off menu and press /

. The time

period can be set from 5 to 30 minutes in 5-minute increments. If the preset time lengths are
not suitable for your presentation, select Disable. The projector will not automatically shut
down in a certain time period.

Lamp

Audio
Pattern
High Altitude Mode
Password
Key Lock
Reset All Settings

Advanced Setup

EXIT Back

Analog RGB

ENTER

Off

Lamp

Lamp Power
Lamp Hours

ENTER

EXIT Back

Reset Lamp Timer

Lamp Hours

Lamp Hours Nor.
Lamp Hours Eco.
Lamp Rest Rate

EXIT Back

100hr
150hr

90%

Eco.

Language
Splash Screen
My Screen
Projector Position
Blank Timer

Auto Off

Sleep Timer
Background Color
Menu Settings
Input Source

System Setup

Analog RGB

English

BenQ

Disable

Auto Source Search

EXIT Back

Disable

Disable

Blue

On

Floor Front

Advertising