Speaker selections, For a detailed description of speaker selections, Recalled using a preset. (see speaker selection – B&K Series 2 User Manual
Page 49: Quickly recall the mono mode from, Able, Quickly recall the stereo mode from the remote, From the front, Recall the surround mode from the remote, Use this audio mode with the analog output, Dvd-audio - 5 is a direct analog p
Speaker Selections
The table below shows how your preamplifier will route audio information to the speaker channels depending
on audio modes and speaker selection combinations. Audio information will not be lost in any speaker selec-
tion. The information for the missing speakers is mixed to other active speakers. When selecting four or five
speakers, choose from the surround or back speakers. When the system setup is correctly performed, the
preamplifier will route audio to fewer small speakers with the needed corrections to volume and "down
mixing" applied automatically.
NOTE: The number provided on the left side of the table defines the speaker option that can be selected
immediately after an audio mode selection from the SR10.1 remote control. For example, pressing STEREO-
2 will select the front left and right speakers plus the subwoofer. Pressing SURROUND-7 will select the
surround mode using seven speakers plus the subwoofer.
47