Philips Avance Collection Kaffeemaschine - Manual (Page 13)

13
4
Place the jug into the appliance.
D Note:
Make sure you place the jug with the spout
facing into the appliance.
5
Press the on/off button to switch on the
appliance.
• The power-on light goes on.
6
Let the appliance operate until all the water
has run into the jug.
7
Glass jug: Press the on/off button to switch off
the appliance. Let it cool down for at least 3
minutes before you start brewing coffee.
4
Reassemble all parts.
5
Put the mains plug in an earthed wall socket.
6
Flush the appliance (see section ‘Flushing the
appliance’ below).
4.1 Flushing the appliance
D Note:
Do not put a filter and ground coffee in the filter
holder.
1
Remove the 2-in-1 loader from the housing
by placing one hand on top of the appliance
and pulling out the 2-in-1 loader with the
other hand.
2
Fill the water tank with fresh cold water up to
the 8 cups indication.
3
Place the 2-in-1 loader back into the housing
until you hear a click.
ENGLISH