Link navigator setup – Buffalo Technology LINKSTATION HD-HLAN User Manual
Page 15
1
This section of the program changes LinkStation’s IP Address. Check the check box that states
Acquire IP Address Automatically. This will give LinkStation an IP Address from the network’s
router/DHCP server. A set (static) IP Address and Gateway can also be set if preferred. The
Administrator Password field sets an administrator password for the web-based configuration. If
desired, type a password in the field. When finished, press the OK button. LinkStation will set
the IP Address and Password settings.
NOTE: If LinkStation was plugged directly into a PC, then the DHCP function will timeout and
give LinkStation the default IP Address of 192.168.11.150. You will need to adjust your PC’s IP
Address to an IP Address on the same subnet (e.g. 192.168.11.151).
Link Navigator Setup