Barco MFCD 1218 - Manual (Page 17)

MFCD 1218 User's Guide 18
APPENDIX B: TECHNICAL
SPECIFICATIONS
Picture panel
18.1-inch diagonal viewable screen
TFT (thin film transistor) active matrix,
color liquid crystal display, RGB
interface
Resolution
SXGA 1280 x 1024 @ 85 Hz (native)
Display area (H x V)
359 x 287 (mm)
Viewing angle
Vertical: 160º
Horizontal: 160º
Input signals
Analog: Hor. 31.47 to 91.2 kHz
Vert. 56 to 85 Hz
Digital: Hor. 31.47 to 64 kHz
Vert. 60 to 70 Hz
TV-video: NTSC (3.58M), PAL (4.43M)
Video: 0.7 Vpp
Sync: TTL level
Max. video input bandwidth
157.5 MHz
Display color
16M
Signal system
Analog RGB signals, DVI Analog/
Digital, Video (S-Video, Composite)
Luminance
250 cd/m
2 (typ.)
Contrast ratio
350:1 (typ.)
Response time
20ms rise time (typ.)
Front panel controls
Menu, - (down / decrease), + (up /
increase), Power
Pixel Pitch
0.2805mm (H) x 0.2805mm (V)
OSD menu controls
Brightness, Contrast, Color, H-
position, V-position, Clock, Phase,
Input Signal Source, OSD position,
Language, Auto-Adjust, Auto-Balance,
Factory Reset
Input connectors
15-pin D-sub
(for PC graphic signal input)
3P - Mini – DIN – Power –Connector
(for DC 12V, 6.5A input)
Mini – DIN – 6 – Connector
(for S-video and composite input)
DVI connector
Power source
100 ~ 240 VAC
Power consumption
48 watts (max.)
Power saving
VESA DPMS standard
EPA/Energy Star compliant
PnP compatibility
VESA DDC 2B standards compliant