Barco MFCD 1218 - Manual (Page 9)

MFCD 1218 User's Guide 10
D
2 To secure the panel, slide forward the locks
on both sides of the mounting plate. Lock
the panel with one screw at both sides (D).
2.3 Connecting the signals
To connect the video & sync signals:
1 Connect one end of the appropriate video
cable to the corresponding video input of the
monitor.
Analog video: Connect to input (2)
S-Video: Connect to input (4)
DVI: Connect to input (3)
2 Connect the other end of the video cable to
the video output of your video source.
Analog video: Computer graphics board with
analog video output
S-Video: E.g., S-VHS video player
DVI: Computer graphics board with digital
video output
(1) (2) (3) (4)
To connect the power:
1 Connect one end of the proper power cable
to the AC input of the 12V DC adapter.
2 Connect the 12V supply of the 12V DC
adapter to the DC input (1) of the monitor.
3 Connect the other end of the power cord to
a grounded power outlet.