Belkin F1DS102T - Manual (Page 6)

OVERVIEW
9
INSTALLATION
8
Pre-Configuration
Where to Place the KVM Switch:
The compact size of the OmniView SOHO Series KVM Switch makes
it perfect for desktop placement. Consider the following when
deciding where to place the KVM Switch: whether or not you intend
to use the manual push buttons for selecting ports; the length of the
cables attached to your keyboard, mouse, and monitor; the location
of your CPUs from your console; and the length of the cables you use
to connect your computers to the KVM.
Cable Distance Requirements:For PS/2 computers: VGA signals are
best retained when transmitted up to 25 feet (7.5m). Beyond 25 feet
(7.5m), probability of video degradation increases with an increase in
distance. For this reason, your PS/2 computer should be placed within
25 feet (7.5m) of the KVM Switch.
Note: If your computer needs to be more than 25 feet (7.5m) from
the KVM Switch, you can use the Belkin CAT5 Extender to
extend your PS/2 keyboard, PS/2 mouse, and monitor up to
500 feet (152.4m) away using standard CAT5 UTP cable.
For USB computers: USB signals are the strongest when transmitted
up to 15 feet (4.5m) between the KVM and the CPU. Beyond 15 feet
(4.5m), probability of signal degradation, which can cause the device
to fail, is likely.
Cautions and Warnings:
Avoid having cables near fluorescent lights, air conditioning
equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Specifications
Part No.: F1DS102P, F1DS104P
Power: By PS/2 keyboard port or optional
9V DC, 600mA AC adapter with center pin
positive polarity
PCs Supported: 2 (F1DS102P),
4 (F1DS104P)
Keyboard Emulation: PS/2
Mouse Emulation: PS/2
Monitor Supported: VGA and SVGA
MultiSync
® , LCD (with use of adapter cable)
Max Resolution: 2048X1536@85Hz
Keyboard Input:
6-pin miniDIN (PS/2)
Mouse Input:
6-pin miniDIN (PS/2)
Audio Input/Output:
3.5mm jack
Microphone Input/Output:
3.5mm jack
VGA Port: 15-pin HDDB type
LED Indicators: 2 (F1DS102P),
4 (F1DS104P)
Enclosure: High-impact plastic
Dimensions:
F1DS102P
(H)6.75 x (W)4.25 x (D)7.75 inches
(H)17.2 x (W)10.8 x (D)19.7 centimeters
F1DS104P
(H)7.75 x (W)4.75 x (D)9.5 inches
(H)19.7 x (W)12.1 x (D)24.1 centimeters
Weight:
F1DS102P 1.5 lbs. (0.68kg.)
F1DS104P 2.0 lbs. (0.91kg.)
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
Part No.: F1DS102T, F1DS104T
Power: By PS/2 keyboard port, USB port, or
optional 9V DC, 600mA AC adapter with
center pin positive polarity
PCs Supported: 2 (F1DS102T),
4 (F1DS104T)
Keyboard Emulation: USB, PS/2
Mouse Emulation: USB and PS/2
Monitor Supported: VGA and
SVGA MultiSync, LCD (with use of adapter
cable)
Max Resolution: 2048X1536@85Hz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
Audio Input/Output: 3.5mm jack
Microphone Input/Output: 3.5mm jack
VGA Port: 15-pin HDDB type
LED Indicators: 2 (F1DS102T), 4
(F1DS104T)
Enclosure: High-impact plastic
Dimensions:
F1DS102T
(H)6.75 x (W)4.25 x (D)7.75 inches
(H)17.2 x (W)10.8 x (D)19.7 centimeters
F1DS104T
(H)7.75 x (W)4.75 x (D)9.5 inches
(H)19.7 x (W)12.1 x (D)24.1 centimeters
Weight:
F1DS102T 1.5 lbs. (0.68kg.)
F1DS104T 2.0 lbs. (0.91kg.)
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 5 years
Note: Specifications are subject to change
without notice.
P73778-A-SOHO-man.qxd 3/5/02 5:10 PM Page 8