Belkin F1DS102T - Manual (Page 9)

PS/2 INSTALLATION
15
PS/2 INSTALLATION
14
Audio and Microphone Connections are not required to use with
your KVM Switch (Recommend Belkin PRO Series Audio Cables
Part # F8V209-XX).
CONSOLE:
7. Using the audio cable attached to your speakers, connect the male
3.5mm plug to the SPEAKER IN jack on the CONSOLE section of
your SOHO Series KVM Switch. See fig. 8.
fig. 8
fig. 9
8. Using the mic cable attached to your microphone, connect the
male 3.5mm plug to the MIC IN jack on the CONSOLE section of
your SOHO Series KVM Switch. See fig. 8.
COMPUTER:
9. Using the audio cable, connect one end of the male 3.5mm plug
to the SPEAKER OUT jack of your sound card or computer and
connect the other end to the SPEAKER IN jack of your SOHO
Series KVM Switch. See fig. 9.
10. Using a second audio cable, connect one end of the male 3.5mm
plug to the MIC OUT jack of your sound card or computer and
connect the other end to the MIC IN jack of your SOHO Series
KVM Switch. See fig. 9.
P73778-A-SOHO-man.qxd 3/5/02 5:10 PM Page 14