Car cord (fc6092 only), Telescopic stick (fc6094 only) – Philips MiniVac Handstaubsauger User Manual

Page 10

Advertising
background image

1

Insert the small plug of the car cord into the car cord socket of the

appliance. Then insert the car plug into the cigarette lighter socket

of your car (Fig. 1).

Note: The car cord cannot be used to charge the appliance.



Press the button on the small plug to detach the car cord from the

appliance.

Caution: To prevent damage, do not pull the small plug out of the

appliance without pressing the button.

telescopic stick (FC6095 only)

1

Push the telescopic stick firmly into the back of the appliance until

it locks into position (‘click’) (Fig. 14).

The telescopic stick gives you extra reach when you clean hard floors,

carpets and hard-to-reach areas.



Attach the floor nozzle to the detachable nozzle (Fig. 15).

The floor nozzle can be used to vacuum hard floors and carpets.

The floor nozzle is equipped with a fluff collector that removes hair and

fluff.
Note: Pass the fluff collector gently over the hairs and/or fluff to be removed.

The hairs and/or fluff are worked loose from the surface, collected and then

sucked up.
Note: The floor nozzle allows you to stop the vacuuming for a short time (e.g.

to answer the phone) without bending and putting the stick on the floor.

Simply push the stick forwards until the rib and the ridge on the floor nozzle

are aligned. This makes the vacuum cleaner stand upright independently

(Fig. 16).



Adjust the stick to the length you find most comfortable during

vacuum cleaning. Push the ring downwards and pull the upper part

of the stick upwards or push it downwards (Fig. 17).

English

10

Advertising