Philips MiniVac Handstaubsauger - Manual (Page 8)

Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
preparing for use
placing the charger
1 To attach the charger to the wall:
Screw the wall mounting bracket to the wall with the screws supplied
with the appliance (Fig. 2).
Place the charger on the wall mounting bracket (1) and push the
charger downwards to fix it (2) (Fig. 3).
Attach the nozzle & stick holder to the wall mounting bracket
(FC6095 only).
Screw the nozzle & stick holder to the wall with the screws supplied
with the appliance.
 To use the charger without attaching it to the wall:
Place the charger on a level and horizontal surface (Fig. 4).
 Slide the brush tool onto the crevice tool and place them in the
charger (Fig. 5).
 FC6095 only: insert the telescopic stick and the floor nozzle into
the nozzle & stick holder (‘click’) (Fig. 6).
Charging the appliance
Caution: Make sure the appliance is switched off when you charge it.
Charge the appliance for at least 18 hours before you use it for the first
time.
When the charging light starts flashing during operation, the battery pack
is running low and needs to be recharged.
Tip: If you are not going to use the appliance for a longer period of time,
remove the adapter from the wall socket to save energy.
-
-
-
-
-
English 8