Brother DCP-7040 - Manual (Page 24)

18
3
Paper settings
3
Paper type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu.
b
Press a or b to choose
1.General Setup.
Press OK.
c
Press a or b to choose 1.Paper Type.
Press OK.
d
Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
e
Press Stop/Exit.
Paper size
3
(For Oceania)
You can use seven sizes of paper for printing
copies: A4, Letter, Executive, A5, A6, B5 and
B6.
(For Asia)
You can use nine sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5, A6,
B5, B6 and Folio.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document on the page.
a
Press Menu.
b
Press a or b to choose
1.General Setup.
Press OK.
c
Press a or b to choose 2.Paper Size.
Press OK.
d
(For Oceania)
Press a or b to choose A4, Letter,
Executive, A5, A6, B5 or B6.
Press OK.
(For Asia)
Press a or b to choose A4, Letter,
Legal, Executive, A5, A6, B5, B6 and
Folio.
Press OK.
e
Press Stop/Exit.
Note
If you chose Transparency as the paper
type you will only be able to choose
Letter or A4 (Legal or Folio for Asia)
size paper in Step d.
General setup
3