Brother DCP-7040 - Manual (Page 26)

Chapter 3
20
Sleep time
3
Setting the sleep time reduces power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle (from 00 to 99 minutes) before it goes
into sleep mode. When the machine receives
computer data or makes a copy, the timer will
be reset. The default setting is 05 minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a
Press Menu.
b
Press a or b to choose
1.General Setup.
Press OK.
c
Press a or b to choose 4.Ecology.
Press OK.
d
Press a or b to choose 2.Sleep Time.
Press OK.
e
Enter the length of time the machine is
idle before entering sleep mode (00 to
99). Press OK.
f
Press Stop/Exit.
Note
To turn off sleep mode, press Start and
Options at the same time in e. Press a or
b
to choose Off. Press OK.
LCD contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu.
b
Press a or b to choose
1.General Setup.
Press OK.
c
Press a or b to choose
5.LCD Contrast.
Press OK.
d
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
e
Press Stop/Exit.
User Settings List
3
You can print a list of the settings you
programmed.
a
Press Menu.
b
Press a or b to choose
1.General Setup.
Press OK.
c
Press a or b to choose
6.User Settings.
Press OK.
d
Press Start.
e
Press Stop/Exit.