B&B Electronics 8 PORT SMART SWITCH CE 232D4SS8 - Manual (Page 20)

18 Documentation Number 232D4SS84502 Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Chapter 2: SOFTWARE
232D4SS8 Users
Any references to the 232XSS in this section are also intended
for the 232D4SS8 Smart Switch.
Introduction
The 232D4SS8 is shipped with 2 disks containing a Windows
software program that will test the operation of the Smart Switch.
When installed the program will allow the Smart Switch to select all
available ports.
•
The Expandable Smart Switch Selector program (232XS) for
Windows 95/98/2000 and NT with service pack 3 can be used
for troubleshooting or in multitasking environments to select
slave ports. There will be a Visual Basic example file that can
be accessed by selection Start/Program Files/B&B
Electronics/232XSS/XSS-EX. This file will give examples on
opening, selection and sending data out a port. The 232XS
program requires 2M of memory.
Windows Selector Program Installation/Instructions
Method One
• Place the “Windows” disk #1 in drive A. (These instructions use
drive A as default for the floppy drive. Replace A with your drive
letter if necessary.)
•
Select Settings from the Start Button and click on Control Panel.
•
In the Control Panel Window, double click on the Add/Remove
Programs.
•
Click on the “Install” button.
•
Follow the instructions of the setup program .