Bushnell Tour V2 User Manual

Page 9

Advertising
background image

9

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle reticle onto

the flag that you want distance to. Next, press and hold the POWER button and move the laser slowly

over the flag or desired object until a circle surrounds the flag indicator. If the laser beam recognized

more than one object (i.e. flag and background trees), distance of the flag will be displayed and a circle

will surround the PinSeeker indicator informing the user that distance to the flag (i.e. closer object) is

being displayed in the LCD (as seen below). There may be times when only the laser beam only sees one

object in its path. In this case, the distance will be displayed, but because more

than one object was not acquired, a circle will not surround the flag indicator.

TIP:

While pressing the POWER button, you can move the device slowly from

object to object and intentionally force the laser to hit multiple objects to ensure

that you are only displaying the closest of the objects recognized by the laser.

Once the device has shut off, the unit will always default back to the last

mode used.

Tour V2 - Slope Edition

(LCD Indicator - ° ) This advanced and patented mode

found on SLOPE EDITION models features a built-in accelerometer-based

inclinometer that digitally displays the exact slope angle from -20 to +20

degrees of elevation and is +/- 1.0 degree accurate. The Slope +/-

mode will

automatically compute an angle compensated range based upon distance and

slope angle determined by the laser rangefinder and built-in inclinometer. This

data is then combined with internal algorithmic formulas dealing with average

club use and ball trajectories. The angle compensated range provides direction

on how to play the shot (i.e. add distance if an incline, subtract distance if

a decline).

201930_33 Tour V2 6LIM.indd 9

8/26/08 2:40:24 PM

Advertising