Brinkmann Gas FirePit - Manual (Page 16)

15
Choose a good, cleared assembly
area and get a friend to help you to
unpack and set up your firepit.
CAUTION: Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Attach the four table panels by
using eight M6 x14mm bolts and
eight M6 washers.
Step 2
Attach the front and back panels
to the table assembly by using
twelve M6 x 14mm bolts.
Step 3
Connect the side panel with the
front and back panels by using six
M6 x 14mm bolts.
Step 4
Attach the connection tube to the
front and back panels by using
four M4 x 10mm bolts.
Front & Back
Table Panels
Left & Right
Table Panels
Back Side
Panel
Front Side
Panel