Important safety information, Warning – Brinkmann Gas FirePit User Manual

Page 4

Advertising
background image

3

WARNING

The installation must conform with local codes or, in the absences of local codes, with the
National Fuel Code, ANSI Z223.1.

The appliance, when installed, must be electrically grounded in accordance with local codes or,
in the absence of local codes, with The National Electrical Code, ANSI/NFPA70. (If applicable)

Always place the firepit on a firm and level surface.

Solid fuels shall not be burned in this gas firepit.

The firepit shall be used only outdoors in a well-ventilated space and shall not be used in a
building, garage or any other enclosed area.

When in use, keep the firepit area clear and at least 50-inch side clearance from combustible
materials, gasoline and other flammable liquid and vapors. Certain items or materials, when
stored under the firepit or nearby will be subjected to radiant heat and could be seriously
damaged.

Inspect the hose assembly and burner prior to each use. If there is evidence of excessive
abrasion or wear, it must be replaced by the specified one of manufacturer.

Inspect the gas connections of firepit prior to each use. Do not operate the unit if there is gas
leak. Inspect annually by a qualified service person.

The pressure regulator and hose assembly provided with the firepit must be used. If they can
not work, they must be replaced by the specified ones of manufacturer.

Children and adults should be alerted to the hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.

Your children and pets should be carefully supervised when they are in area of firepit.

Any guard or other protective device removed for servicing the firepit must be replaced prior to
operation.

Clothing or other flammable materials should not be hung from the firepit or placed on or near
the firepit.

Do not use the firepit if any part has been under water.

Immediately call a qualified service technician to inspect the appliance and to replace any part
of the control system and any gas control which has been under water.

LP-gas supply cylinder to be used must be constructed and marked in accordance with the
specifications for LP-gas cylinders of the U.S. Department of Transportation (DOT).

The cylinder supply system must be arranged for vapor withdrawal and the cylinder must
include a collar to protect the cylinder valve.

Firepit is hot when in use. To avoid burns:

DO NOT attempt to move the firepit.

Wear protective gloves or oven mitts.

DO NOT touch any hot firepit surfaces.

DO NOT wear loose clothing or allow hair to come in contact with firepit.

USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS FIREPIT.

FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS

MANUAL COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

IMPORTANT SAFETY INFORMATION

Advertising