BlueAnt Q2 - Manual (Page 13)

EN
G
LI
SH
13
List of Voice Commands
When you want to do something, just click the MFB , wait for the Q2 to ask you to Say A
Command , and then say one of the following commands:
> Am I Connected? — The Q2 will check if your phone is connected, and attempt to connect if
it is not.
> Call Back — Calls back the last incoming call received on the Q2.
> Check Battery — Tells you the battery level on the Q2.
> Pair Me — Puts the Q2 into pairing mode. Any connected phone will be disconnected.
> Phone Commands — Activates your phone’s voice dialing feature (if supported). Depending
on your phone model, you may need to record voice tags on the phone to use this feature.
> Redial — Redials the last outgoing call made on the connected phone.
> Sensitivity Level — Confi gures the sensitivity of the Q2’s voice recognition.
> LED Light — Turns the LEDs on or off. When the LEDs are set to off, they still light up when
you turn the Q2 on or off, but will not fl ash at other times.
> Update Phonebook — Updates your phonebook contacts on the Q2. If you add contacts to
your phone, or change the numbers associated with existing contacts, then you will need to