Brother MFC-5860CN - Manual (Page 97)

87
14
14
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge
14
PictBridge requirements
14
To avoid errors, remember the following
points:
„ The machine and the digital camera must
be connected using a suitable USB cable.
„ The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
„ PhotoCapture Center™ operations are
not available when using the PictBridge
feature.
Using PictBridge
14
Setting your digital camera
14
Make sure your camera is in PictBridge
mode.
„ Some of the settings listed below may not
be available for your PictBridge
compatible digital camera.
1 See DPOF printing on page 88 for more details.
2 If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the settings below.
Please refer to the doc.umentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Printing photos from a camera
with PictBridge
14
Camera Menu
Selections Options
Paper Size Letter, A4, 10 ×15cm,
Printer Settings (Default
setting)
2
Paper Type Plain Paper, Glossy
Paper, Inkjet Paper,
Printer Settings (Default
setting)
2
Layout Borderless: On,
Borderless: Off, Printer
Settings (Default setting)
2
DPOF setting
1 -
Print Quality Normal, Fine, Printer
Settings (Default setting)
2
Colour
Enhancement On, Off, Printer Settings
(Default setting)
2
Settings Options
Paper Size 10 ×15cm
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Colour Enhancement Off