SoundMax SM-2403 - Manual (Page 5)

5
Cassette tape playback
Slide the FUNCTION switch to TAPE position.
Press the STOP/EJECT button to open the cassette compartment.
Insert a cassette with the tape-side up into the proper guide-rails on the inside of the cassette door.
Gently push the cassette door forward (inwards) to close it.
Press the PLAY button to start the playing.
Adjust the level of sound with VOLUME knob.
Cassette controls
Press the PAUSE button to pause the playing.
Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you can
take out the tape.
Cassette tape recording
Open the cassette door by pressing the "STOP/EJECT" cassette button.
Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette door.
Gently push the cassette door forward (inwards) to close it.
Make sure the tape is fully and properly inserted before doing so.
The set is now ready to start recording, which can be done from either the radio or CD-player.
Recording from radio
Set the FUNCTION switch to RADIO position.
Tune to the desired station.
Press the PLAY button and RECORD button on deck simultaneously to start recording.
Press STOP/ EJECT button to end recording.
Recording from CD
Set FUNCTION switch to CD position.
Press RECORD and PLAY buttons on cassette deck simultaneously to start recording.
Press the PAUSE button on deck.
Start the CD-player and select the exact song to be recorded.
Release the PAUSE button on deck to start recording.
Press STOP/ EJECT button to end recording.