Boston Acoustics Horizon Solo - Manual (Page 10)

10
Setting a Station Preset
1 Tune in the FM or DAB station you want to assign to a preset.
3 Press and hold the TUNE control for 3 seconds. The preset
indicator in the upper left corner of the display will light
indicating the station has been stored in the preset.
In this example FM station 104.75 has been assigned to preset 1.
Tuning in a Preset Station
1 Turn the MODE/INFO control to highlight “Preset” in the display.
2 Press the MODE/INFO control. The last preset tuned in is
recalled.
3 Turn the TUNE control to select the station preset you want.
4 Press the TUNE control to select the preset.
Removing One or More Presets
To remove one preset, tune in the preset station as described above.
Press and hold the TUNE control until “Preset Cleared” fl ashes in the
display.
If you want to clear all the presets so you can reprogram them, press and hold the TUNE control for 10
seconds until “Presets Empty” appears in the display.
Alarm Clock Features
The Solo XT has two independent alarm settings. Each can have its own type of alarm —wake to tone, wake
to music or both. Both types of alarms start at a low volume level that gently increases. In addition you can
set the alarms for every day, weekdays only or weekends only .
Alarm Setup
1 Press and hold the Alarm 1 or Alarm 2 button for one second to access
the “Alarm Setup” screen shown here.
2
Turn the MODE/INFO control to highlight the item you want to adjust,
then press the control to select it. For example, if you highlight “Alarm
Time” and press the control you’ll see the second display screen with the
Alarm Time highlight box fl ashing.
3 Turn either the MODE/INFO or TUNE control to adjust the Alarm Time,
then press the control.