Boston Acoustics Horizon Solo - Manual (Page 8)

8
DAB Radio
The DAB Station List
When you plug in the Solo XT for the fi rst time it automatically searches the DAB radio bands for stations
and puts the available stations in a list. If you move the Solo XT to a new location you can use the DAB
Scan feature to reset the station list. You can also manually tune to the station list available on specifi c DAB
multiplex bands. For more information see the “DAB Station Setup” on the following page.
Tuning in a DAB Station
1 Turn the MODE/INFO control to highlight “DAB”. Press the
control
2 Turn the TUNE control to display the list of available
stations.
3
Highlight the station you want and press the TUNE
control to select it.
Notes:
Only stations that were put in your station list by the initial
automatic station scan, a scan you perform with the DAB Scan
function, or that you tune manually are displayed as you turn the TUNE control.
You can change the order in which the stations are displayed. See the “DAB Display” and “Display Menu”
sections on the following pages.
The DAB Display
When using the DAB radio the display shows a
variety of information. In the main part of the
display the fi rst line is station name.
The second line of the display center shows one of the following:
Genre — Signal Quality (in %) — Compression — Network — Frequency — Date and Time.
You can set the default information you want to appear in this line. See the “Display Menu” section of this
manual. In addition you can change the information in the second line by pressing the MODE/INFO control.
Each press switches to the next information mode.
The fi nal line will always be scrolling text information provided by broadcast station.
 

Time
Signal Strength Preset (if assigned)
Station Name
Varying Information
Scrolling Text