Belkin AP20500EA3M - Manual (Page 13)

B
elkin
P
ow
er
C
ons
ole
12
Hookup and Installation
Step 7
Connect your Broadband Ethernet Line
Your Belkin Power Console comes equipped with broadband Ethernet-line
protection. These are standard RJ45 Ethernet ports and they are
labeled “Network”.
A. Connect one end of an RJ45 network patch cable to a network port
(either directly to a router or wired network wall port). Connect the
other end of the network patch cable to the network port labeled “IN”.
B. Connect one end of the broadband Ethernet cable (included) to the
network port labeled “OUT”. Connect the other end of this cable to the
networked device (digital media receiver, gaming console, etc.)
Note: We have included labels for the “Network IN” and “Network OUT”
lines, if needed, for better organisation.
(*89i\Xb\i <Xik_