Blaupunkt ATLANTA RCM 169 - Manual (Page 39)

87
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
As soon as the self-adjustment has been
completed, the setting which has been ad-
justed will appear in the top line of the dis-
play. A graph indicating the values set will
appear in the DOT display.
If desired, proceed to take readings for the
remaining adjustable settings.
If necessary, you can alter the self-adjust-
ed settings to suit your own individual tastes.
Refer to the section on “Manual equalizer
adjustment”.
Note:
All of the car speakers should be connect-
ed correctly when you take the readings.
If the speakers or the microphone are not
connected to the system properly when you
attempt to take the readings, the self-adjust-
ment process will be interrupted and ”Error”
will appear briefly in the top line of the dis-
play.
The previous setting will not be altered.
Manual equalizer adjustment
If you prefer to adjust the equalizer manual-
ly, you can enter the settings for EQ1 to EQ3
manually.
However, you can also adjust the settings
made electronically to suit your own individ-
ual tastes.
You can set seven frequency bands from
64 Hz to 15600 Hz separately for the left and
right channel.
Altering the setting manually
• When the equalizer is switched on,
press DSA and ADJ one after the oth-
er.
The setting selected last will appear in the
top line of the display.
• Press / to select the setting you
want to alter (EQ1, EQ2, EQ3).
• Press LEFT or RGHT to alter the fre-
quencies for the corresponding chan-
nel.
• Press << >> to select a frequency
band.
• Press / to select the intensity.
Set all of the frequency bands one after the
other for the left and right channels.
After you have completed your setting
•
press ENT.
Now you can alter the next setting.
To quit the menu
•
press EXIT.
Activating an equalizer setting
If you would like to select a different equal-
izer setting, e.g. “CLASSIC” instead of
“JAZZ”,
•
press DSA and EQ one after the other.
The setting selected last will appear in the
top line of the display.
• Press / to select:
“EQ1”, “EQ2”, “EQ3” or
“ROCK”, “POP”, “JAZZ”, “CLASSIC”,
“VOCAL”.
• and press ENT.
Press EXIT to quit the DSA menu.
DSA – Digital Sound Adjustment
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr 87