Appendix 3: the dco-100 headset adapter – BenQ Z2 User Manual
Page 148
Advertising
132
Appendix 3: the DCO-100 Headset Adapter
Appendix 3: the DCO-100 Headset
Adapter
This optional accessory may not be available in all areas.
This headset adapter is used for connecting a standard 3.5mm headset
to the phone.
1. Plug the adapter into the headset jack at the bottom of the phone.
2. Plug the standard 3.5mm headset to the adapter. Then you can use
the phone with the standard 3.5mm headset to listen to the music.
To answer an incoming call, you must remove the adapter from the
phone.
Advertising