BenQ Z2 - Manual (Page 50)

34 Using Your Phone
Finding Contacts in the Phone Book
1. In the idle mode, press (Names) to display contacts stored in the
Phone Book.
• Press the alphanumeric key that corresponds to the first letter of the
name you wish to locate the appropriate number of times.
• If necessary, scroll to the contact you want.
will appear on the top of the screen if the contact is stored on
your SIM card; will appear if the contact is stored in your phone
memory.
2. When you have found the contact you want, you can
• Press to dial the number. If the entry has more than one phone
number, then you will be prompted to select a number.
• Press (Option) to edit, delete, copy the contact to the SIM card
or the phone memory (Copy to SIM/Phone), or add a new contact.
Used to set a ring tone for the contact. When there is an
incoming call from the contact, the phone will play this ring
tone.
A ring tone set in this field will replace the one
associated with the contact's caller group, if any.
Used to set the image that will appear on the display when
there is an incoming call from the contact.
The image set in this field will replace the image
associated with the contact's caller group, if any.