Brinkmann Hanging Cypress Extra-Long Solar Powered Accent Lights 822-1526-2 - Manual (Page 4)

OPERATING INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
3
Step 1
To form a hanger for the solar light,
connect the hook section with one or
two stand sections, depending on the
height desired.
Step 2
Locate an area of solid ground where
you can place your solar lights and
insert ground stand.
Step or press down on ground stand
to aid in driving stand into ground.
Make sure ground stand is inserted
all the way into ground.
NOTE: Ground can be softened by
soaking area with water first.
Step 3
Once ground stand is firmly in place,
insert hanging hook into center hole
of ground stand.
Step 4
Hang light fixture from hanging hook.
The photocell light sensor should
point away from other nighttime light
sources.
Step 5
For optimum performance, it is best
to charge the solar light for a FULL,
SUNNY DAY. The light will turn on
automatically at night. The Ni-Cd
rechargeable battery provides
increased brightness and stays on
longer as it cycles over time (days
and nights of charging and
discharging). The more direct
sunlight that the light receives
during the day, the brighter and
longer the light will stay on at night.
Ground Stand
Hook Section
Hanging Hook
Ground Stand
Stand Sections
Hanging Light Assembly
INSTR-cypress-hang.qxd 1/2/04 09:35 AM Page 4