Brinkmann Hanging Cypress Extra-Long Solar Powered Accent Lights 822-1526-2 - Manual (Page 5)

4
Top Housing
Battery
Battery
Compartment Lid
Lens
Top Housing
Tabs
IMPORTANT: The EPA Certified RBRC ® Battery Recycling
Seal on the nickel-cadmium (Ni-Cd) battery contained in
our product indicates The Brinkmann Corporation is
voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful life,
when taken out of service in the United States or Canada.
The RBRC
® program provides a convenient alternative to
placing used Ni-Cd batteries into the trash or the municipal waste stream,
which may be illegal in your area. Please call 1-800-8-BATTERY™ for
information on Ni-Cd battery recycling and disposal bans/restrictions in your
area. The Brinkmann Corporation’s involvement in this program is part of our
commitment to preserving our environment and conserving our natural
resources.
Changing Battery
Step 1
Remove lens from top housing by
turning lens clockwise.
Step 2
With top housing upside down (solar
panel facing down), push battery
compartment tab and lift off battery
compartment lid.
Step 3
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the tabs
with the slots in top housing. Turn
counter-clockwise to lock in place.
NOTE: These lights utilize L.E.D. (Light
Emitting Diode) technology.
There are no bulbs to replace.
It is important that the solar panel is kept
free of dirt and debris. A dirty solar panel
will not allow the battery to fully charge.
This will shorten the life of the battery and
cause the light to malfunction. Clean
regularly with a dampened cloth or paper
towel.
Cleaning
INSTR-cypress-hang.qxd 1/2/04 09:35 AM Page 5