Behringer GUITAR LINK UCG102 - Manual (Page 15)

15
GUITAR LINK UCG102
DEUTSCH
3.2 System requirements
To connect the GUITAR LINK UCG102 to a
computer, you need a free USB slot.

The UCG102 is compatible with both PCs
and Mac computers. Therefore, no
installation procedure or drivers are
required for the correct functioning of the
UCG102. As soon as you connect the
UCG102 to a free USB slot, it will be
recognized as generic USB audio device.

If you want to make use of the included
drivers and applications, please observe
the system requirements of the
respective manufacturers.
If you want to use the guitar for real-time
applications on the PC, for example, to record or
to use with the provided “Guitar Combos” from
Native Instruments, we strongly recommend the
installation of the included USB audio driver to
ensure a low latency (see Chapter 3.3).
To work with the software that comes with the guitar, your computer must meet the following minimum
requirements:
PC MAC
Operating system Windows XP Mac OS X v10.3.x
Processor
Pentium 700 MHz
Athlon XP 1.33 GHz
G4 733 MHz
RAM 256 MB 512 MB
3 SOFTWARE