Behringer GUITAR LINK UCG102 - Manual (Page 17)

17
GUITAR LINK UCG102
DEUTSCH
4 APPLICATION EXAMPLE
4 APPLICATION EXAMPLE
You can connect the UCG102 directly to your computer in order to record, play along to a playback or
play directly over the modeling amps and effects. The UCG102 lets you get started immediately,
wherever you are. Simply hook up and start to rock.
4.1 Operation of the connector
Fig. 4.1: Wiring of the UCG102
Use the USB cable to connect the GUITAR LINK
UCG102 to your computer. The USB unit of the
UCG102 is bus powered—no separate power
supply is needed. The blue LED (
) lights up
and the system indicates the connection of a
USB audio unit.
Connect your headphones to the PHONES
connector on the UCG102.
If you don’t want to use your headphones, you
can also connect a pair of active monitors to the
PHONES connector—the BEHRINGER MONITOR
SPEAKERS Series, MS16, MS20, MS40,
B2030A or B2031A are perfect choices for this
application.