Buhler 595 - Manual (Page 10)

8
Safety Decals
These decals are located as shown on the Decal Location diagram and the Sub-Frame Assembly
diagram.
1. Read Operator's Manual before operating.
2. Move and turn tractor at low speed.
3. Carry loader arms at a low position during transport.
4. Lower loader arms, stop engine and lock brakes before
leaving operator seat.
5. Do not stand or work under raised loader, unless properly
supported.
6. Add recommended wheel ballast or rear weight for stability.
7. Move wheels to widest recommended settings to increase
stability.
8. Do not handle large round bales or other shiftable objects
unless loader is equipped with a grapple fork.
9. Do not use loader to move or carry people.
10. Stay away from power lines. Electrocution can occur
without direct contact.
11. Review safety instructions annually.
CAUTION
To prevent serious injury or death:
1. Do not stand or work under raised loader, unless supported.
2. Support bucket and lift arms before working under loader.
3. Lower loader to the ground before leaving seat.
OVERHEAD HAZARD
STAY AWAY FROM UNDER LIFT
ARMS AND BUCKET
WARNING