Boss Audio Systems DR-670 - Manual (Page 45)

45
Chapter 1 Before Composing Rhythm Patterns and Songs
Chapter
1
■ Scale Display
The “▼” mark in the scale display indicates the timing of the quarter notes.
fig.01-23
When there are too many beats to allow all of the notes from the beginning to the end of the
pattern to be displayed at one time, “ ” appears, indicating that there are steps that are not
being displayed.
fig.01-24
■ Changing the Scale
By changing the scale (the length of individual steps = a single square), you can have patterns
containing many notes be shown in their entirety, as well as display the content of more
complex patterns.
(Example)
fig.01-25
Operation
1. Hold down [SHIFT] and press [8] (SCALE).
2. While continuing to hold down [SHIFT], turn the TEMPO/VALUE dial to change the scale setting.
For example, when set to “16,” the length of a step becomes a sixteenth note.
Valid Settings: 32, 16 (triplets), 16, 8 (triplets), 8
fig.01-26
* Changing the scale settings does not change the performance data.
SCALE: 32 BEAT: 4/4
SCALE: 16
SCALE: 8