Before you start recording – Boss Audio Systems DR-670 User Manual

Page 63

Advertising
background image

63

Chapter

4

Chapter 4 Recording and Editing Songs (Song Edit Mode)

This section describes the procedures used for
recording (Realtime/Step) and editing User
patterns.
These operations are carried out in Song Edit
mode.

To switch to Song Edit mode, hold down
[SHIFT] while the performance is stopped
and press Key Pad 2 (SONG EDIT).

fig.04-00

fig.04-01

Select a song to create or edit when in
Song Edit mode.

1. With the performance stopped, hold down

[SHIFT] and then press Key Pad 2 (SONG
EDIT) to switch to Song Edit mode.

* Continue to hold down [SHIFT].

2. Hold down [SHIFT] and rotate the TEMPO/

VALUE dial to select the song.

* You can also select the song by inputting the

number with the numerical keys and pressing
[

].

fig.04-01A

3. Release [SHIFT].

fig.04-01b

Before You Start Recording

When creating a new song, proceed through the
following steps for the recording.

fig.04-02

● You can record up to a maximum of 100

songs.

● You can record up to a maximum of 250

patterns in one song, with a maximum
total number of 3,000 patterns for all the
songs together.

Holding down

<1> Select an Unrecorded Song

<2> Select the Tempo (Initial Tempo)

<4> Edit the Song (Insert/Delete/Copy)

<5> Confirm the Recorded Song

Song is Finished

<3A> Do Realtime Recording

or

<3B> Do Step Recording

Advertising