Bushnell WEATHERFX 960072C User Manual
Page 15
15
6.
In the first few minutes of RF reception from the USB Transmitter, the Receiver may show
data on only part of the screen-this is normal. The rest of the screen display data will
gradually appear in the next 10 minutes or more. If you have waited 1 hour or more
without seeing the rest of the weather data, shorten the distance between the Transmitter
and Receiver, also check the Receiver’s battery condition. Then repeat the setup procedure
in the TRANSMIT DATA FROM PC SOFTWARE TO THE RECEIVER section.
7.
If the RF indicator is showing full strength (
) but one or more of the next 3 days’
forecast is missing on the Receiver and HuntFXi program screen, your PC may be offline,
or the internet connection was interrupted earlier. Connect your PC to the internet again
to receive the latest forecast update.
8.
If all forecast information appears except the UV Index, your PC may have been offline for
more than 1 day. Connect your PC to the internet again to receive the latest UVI forecast
update.
9.
If the forecast reading of the HuntFXi software does not match with the Receiver, click
“SEND TO RECEIVER” to re-transmit the signal again and wait for at least 10 minutes.
10.
If your time on the HuntFXi software window and Receiver display is off by half an hour
or more, click “SETTINGS” in the HuntFXi application and set the hour offset until the
proper time is set.
11.
If your city does not appear in the location list, select the one nearest to your home
location.
12.
Heavy internet traffic may slow down the response time of the weather data server
temporary. Try again later if you wish to update the forecast manually by clicking
“UPDATE” on the HuntFXi program screen.
For any other problems or questions,
please contact Bushnell Customer Service at:
(800) 423-3537 • www.bushnell.com