Bushnell WEATHERFX 960072C - Manual (Page 4)

4
Quick Start Guide
1) Install the Software
Insert the CD, click the “HuntFXi Setup Wizard” button and follow the onscreen directions
to install the HuntFXi software on your PC (Windows 2000 or later, with an “always on”
internet connection).
2) Connect the Transmitter
Connect the USB Transmitter to your PC’s USB port.
3) Launch the HuntFXi application, Set Locations and
Units
Double click the “HuntFXi” icon on your desktop. When the application opens, move the
cursor into the far left box at the top, then click “Edit Location” when it appears. Set your
current location by selecting from the four drop down lists, then click “Save”. Follow the same
process to setup any or all of the remaining four location boxes. Next, click the “Settings”
button and set your preferences for temperature, wind speed units and time format, then
click “Save”. In the main HuntFXi application window, you can click in any of the other
“location boxes” you set up to see the forecast for that city.
4) Setup the Receiver Unit (Remote Display)
Insert 4xAA batteries into the Receiver, or connect the AC adapter. The Receiver’s display
initializes and reads “Searching for PC” (press the SEARCH button on the back of the
unit if this does not appear). Attach the easel stand to the Receiver and place it near the PC so
you can see its display while you complete the setup.
5) Transmit Weather Data from the PC Application to
the Receiver
Click “Send to Receiver” on the HuntFXi program window. The red LED on the USB Transmitter
will glow, then blink while data is transferred from the PC software to the Receiver. The
Receiver will indicate “PC FOUND-PLS WAIT 5 MINS” When the Transmitter’s light stops
flashing, check to see that the receiver’s display matches the weather data shown on the PC
screen. Make sure the location box selected on the HuntFXi application and the “Favorite”
location # on the Receiver display are the same (use the +/- buttons on the Receiver to
change locations ). Also be sure the units for temperature, wind speed, etc. are set the same
(click “Settings” on the software screen, press UNITS on back of the Receiver and change
them using the +/- buttons if necessary-press UNITS again to change other displayed
units ). Keep the HuntFXi application running in the background and keep your PC powered
on and connected to the internet, so the Receiver can provide you with the latest up-to-date
forecast information.
Problems? Questions?
Please read the following detailed Instructions and Troubleshooting.