For parallel interface cable users, Ca nc el, Step 2 – Brother HL 5170DN User Manual
Page 16: Installing the driver
Advertising
14
Installing the Driver
Connecting the printer to your PC and installing the driver
1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Select the Parallel interface.
3
Turn off the printer power switch.
4
Connect the parallel interface cable to your
PC, and then connect it to your printer.
5
Turn on the printer power switch.
For Parallel Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel
button.
CA
NC
EL
Step 2
Advertising