Philips 9314SC0B0119 - Manual (Page 36)

ENGLISH
•  •
WATER hARDNEss
The hardness of tap water may vary from region to region. For this
reason, the appliance may be adjusted according to the degree of
hardness of the water in the place it will be used in; hardness is
measured on a scale of 1 to 4.
The appliance is already programmed for an average value
(hardness 3).
The appliance setting should be adjusted according to
the actual hardness of the water, which can be measured using the
test strip provided.
Briefly dip (1 second) the test strip provided in water and
shake it gently. After one minute you can read the test results
on the strip.
• After accessing the programming mode press “
∧” or “∨” to select
the function:
WATER HARDNESS
and enable it by pressing “MENU/OK”.
• The display will show:
WATER HARDNESS
HARDN 3
• Check the test strip previously immersed in water to see how many
squares have changed colour.
• Press “ ∧” or “∨” to select the correct water hardness (e.g. 2 squares
= Hardness 2) and memorise it by pressing “MENU/OK”.
Caution: descale the appliance when the max water
hardness level is reached.
The display will show the message:
DESCALING
READY FOR USE
cup hEATER pLATE
This function allows you to turn on the cup heater plate present in the
machine cover.
CUP HEATER
• In programming mode, select the function using the “ ∧” or “∨”
button, and confirm using the “MENU/OK” button.
• It will thus appear the indication to choose whether you wish to
select
CUP HEATER
ON
or
CUP HEATER
OFF
using the “ ∧” or “∨” button, and confirm your choice using the
“MENU/OK” button.
TEmpERATuRE
This function allows you to adjust the water temperature to obtain hotter
or less hot coffee (Minimum, low, medium, high and maximum).
• After accessing the programming mode press “ ∧” or “∨” to select
the function:
TEMPERATURE
then enable it by pressing “MENU/OK”.
The display will show, for example:
TEMPERATURE
MEDIUM
• Press “ ∧” or “∨” to select the desired temperature and memorise
it by pressing “MENU/OK”.
pRE-bREWINg
In the pre-brewing process the coffee is slightly moistened before actual
brewing. This brings out the full aroma of the coffee, which thus acquires
a delicious flavour.
• Press “ ∧” or “∨” to select the function:
PREBREWING
then enable it by pressing “MENU/OK”.
The display will show:
PREBREWING
ON
• by pressing “ ∧” or “∨” you can choose to deactivate the func-
tion
PREBREWING
OFF
or extend the pre-brewing phase
PREBREWING
LONG
to enhance the flavour of your coffee.
• Memorise the choice by pressing “MENU/OK”.