Philips 9314SC0B0119 - Manual (Page 38)

ENGLISH
•  •
The clock is set and the machine will go back to the previous
menu.
Note: keeping the buttons pressed down will allow you
to go through the numbers quickly.
Note: the clock setting is also maintained when the
machine is off
Displaying the time
• press “ ∧” or “∨” to select the function
SHOW CLOCK TIME
and enable it by pressing “MENU/OK”.
• press “ ∧” or “∨” to activate or deactivate the function
SHOW CLOCK TIME
ON
and memorise the setting by pressing “MENU/OK”.
Note: the time may be displayed only at certain times;
this function must be deactivated by the user
• If you want to deactivate the function press “ ∧” or “∨” to choo-
se:
SHOW CLOCK TIME
OFF
and memorise by pressing “MENU/OK”
Programming the machine to switch on and off .
The machine can be switched on and off automatically without the
user’s intervention. You can program only one time for the machine to
go on and one time for it to go off.
Note: this function is enabled only if the on/off switch
(7) is positioned on “I” (on).
• press “ ∧” or “∨” to select the function:
ON/OFF TIME
and enable it by pressing “MENU/OK”.
• Select the hour when you want the machine to go on by pressing
“ ∧” or “∨” and memorise by pressing “MENU/OK”.
ON/OFF TIME
ON 7:30
then press “ ∧” or “∨” to set the minutes and memorise the setting
by pressing “MENU/OK”.
• Select the hour when you want the machine to go off by pressing
“ ∧” or “∨” and memorise by pressing “MENU/OK”;
ON/OFF TIME
OFF 9:30
then press “ ∧” or “∨” to set the minutes and memorise the setting
by pressing “MENU/OK”.
warning: if the on/off time settings coincide, the ma-
chine will ignore both. After the times have been set,
the clock must be activated in order for the function to work.
Activating the automatic on/off function
Note: activating this function makes sense only if you
have already set the on/off times.
• Press “ ∧” or “∨” to select the function:
CLOCK
enable it by pressing “MENU/OK”.
• The display will show:
CLOCK
OFF
In this case pressing “MENU/OK” will deactivate the function.
Choose to activate the function by pressing “ ∧” or “∨” and
when
CLOCK
ON
appears, memorise the setting by pressing “MENU/OK”.
When you exit the programming mode, the machine will check the set
parameters. If the current time falls within the set deactivation time,
the display will indicate:
ENERGY SAVING
Note: during the set deactivation period, the ma-
chine can be restarted at any time by pressing
“MENU/OK”.