Brother DCP-135C - Manual (Page 30)

Chapter 3
22
To enlarge or reduce the next copy follow the
instruction below:
a
Load your document.
b
Press Enlarge/Reduce.
c
Do one of the following:
„ Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
„ Press a or b to choose
Custom(25-400%)
. Press OK.
Press a or b repeatedly to enter an
enlargement or reduction ratio from
25%
to 400%. Press OK.
d
Press Mono Start or Colour Start.
Note
Page Layout Options 2 in 1 (P),
2 in 1 (L)
, 4 in 1 (P),
4 in 1 (L)
or Poster(3 x 3) are not
available with Enlarge/Reduce.
Making N in 1 copies or a
poster
3
You can reduce the amount of copies by
using the N in 1 copy feature. This allows you
to copy two or four pages onto one page,
which allows you to save paper.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster.
Important
3
„ Please make sure paper size is set to
Letter
, Legal, or A4.
„ You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
„ N in 1 colour copies are not available.
„ (P) means Portrait and (L) means
Landscape.
„ You can only make one poster copy at a
time.
a
Load your document.
b
Press Copy Options and a or b to
choose Page Layout.
Press OK.
c
Press a or b to choose 2 in 1 (P),
2 in 1 (L)
, 4 in 1 (P),
4 in 1 (L)
, Poster(3 x 3)or
Off(1 in 1)
.
Press OK.
d
Press Mono Start to scan the
document.
You can also press Colour Start if you
are using the Poster layout.
e
After the machine scans the page, press
a
(Yes) to scan the next page.
Next Page?
a Yes b No
Press
and then a or b to
choose
Page Layout
.
Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)