Brother DCP-135C - Manual (Page 67)

Troubleshooting and Routine Maintenance
59
B
Changing LCD language
B
You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup
.
Press OK.
c
Press a or b to choose
0.Local Language
.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Improving the LCD viewing
B
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup
.
Press OK.
c
Press a or b to choose
2.LCD Contrast
.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
Unusable Device
Please Disconnect
USB Device.
A USB device or USB Flash
memory drive that is not supported
has been connected to the USB
direct interface.
For more information, visit us at
http://solutions.brother.com. Unplug the device from the USB direct interface.
Error Message Cause Action