Black & Decker Dust Buster AA045020D - Manual (Page 14)

14
ENGLISH
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl.
Replacing the filters
The filters should be replaced every 6 to
9 months and whenever worn or damaged.
Replacement filters are available from
your Black & Decker dealer (cat. no. VF60).
◆
Remove the old filters as described
above.
◆
Fit the new filters as described above.
Protecting the environment
Separate collection. This
product must not be disposed
of with normal household waste.
Should you find one day that your
Black & Decker product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
Battery (Fig. G)
NiCd/NiMH
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Warning! Disconnect the appliance from
the power supply before removing the
battery.
◆
Discharge the battery by operating
the appliance until the motor stops.
◆
Take the accessories from the
appliance.
◆
Remove the screws (6).
◆
Open the appliance.
◆
Remove the battery and the attached
motor and switch module (7).
◆
Use a screwdriver to detach the battery
from the motor and switch module.
◆
Place the battery in suitable
packaging to ensure that the
terminals cannot be short-circuited.
◆
Take the battery to your service
agent or a local recycling station.
Warning! Once removed, the battery
cannot be refitted.
Technical data
NV3600
Voltage V 3.6
Battery type NiCd/NiMH
Weight kg 0.9
Service
Black & Decker offers a full network of
company-owned and authorized service
locations. All Black & Decker Service
Centers are staffed with trained personnel
to provide customers with efficient and
reliable power tool service.
Whether you need technical advice, repair,
or genuine factory replacement parts,
contact the Black & Decker location
nearest you.
Charger
Voltage AR
Voltage B2C
Voltage B3
Voltage BR Model No.
AA045020D
VA050025D
UA050020a
90501843 Input
220V ~ 50Hz 45mA
220V ~ 50Hz 45mA
120V ~ 60Hz 5W
127V/220V ~ 60Hz 4W Output
4.5V ~ 200mA
5V ~ 250mA
5V ~ 200mA
4.5V ~ 130mA