Philips HD8775-48 - Manual (Page 16)

14 ENGLISH
4 Put the “INTENZA+” water fi lter into the empty water tank. Press it
down until it cannot move any further.
5 Fill the water tank with fresh water and reinsert it into the machine.
6 Dispense all the water of the tank by using the hot water function (see
“Hot Water Dispensing” chapter).
7 Fill the water tank again.
8 Press the “ ” button and scroll the pages by pressing the “ ” button
until the following display is shown.
Y
ello
w
9 Press the “ ” button to select “ON” and press the “ ” button to con-
fi rm.
Y
ello
w
Gr
een
10 To exit, press the “ ” button. The machine shows this display and is
ready to brew.
The machine has now been programmed to inform the user when to
replace the “INTENZA+” water fi lter.
Gr
een
3 Set the “INTENZA+” water fi lter according to the measurements per-
formed (see previous chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip