Behringer PMX5000 - Manual (Page 11)

11
EUROPOWER PMX1000/PMX3000/PMX5000
Fig. 5.3: Dual mono operation
For a dual mono operation, the AMP MODE switch must
be set to its center position (MON1/MONO for PMX3000/PMX5000
or MON for PMX1000)! The two SPEAKON ® outputs provide the
main and the monitor signals, separately from each another.
Each of these signals is then sent to two speakers wired in
parallel.
Fig. 5.4: Standard set-up (example)
The illustration shows just one channel configuration possible,
comprising mono and stereo sources and additionally the tape
input/output for recording the mix signal or feeding in a playback
signal.
5. WIRING EXAMPLES