Installation, 3 loudspeaker connections – Behringer PMX5000 User Manual
Page 9
9
EUROPOWER PMX1000/PMX3000/PMX5000
4. INSTALLATION
Fig. 4.2: 1/4" TRS connector
Fig. 4.3: XLR connectors
Fig. 4.4: 1/4" mono plug for footswitch
4.3 Loudspeaker connections
Your power mixer is equipped with high-quality Neutrik NL4MP
SPEAKON
®
connectors, which ensure safe and trouble-free
operation. The SPEAKON
®
connector was especially developed
for high-power loudspeakers. Once it is plugged in, it safely
locks into position and cannot be accidentally disengaged. It
prevents the occurrence of electrical shock and ensures the
correct polarity. Each of the SPEAKON
®
jacks carries only the
assigned single signal (see the information given on the rear
panel of the power mixer).
Fig. 4.5: SPEAKON
®
connector
Please be sure to only use commercial SPEAKON
®
cables (type
NL4FC) for connecting your loudspeakers to the power mixer.
Please check the pin assignment of your loudspeakers and
cables dependent on the PMX speaker output you choose.
PVUQVUÃ6
1+
1-
2+
2-
H6DIÃG
x
x
HPIDUPS
x
x
HPIP
x
x
PVUQVUÃ7
x
x
PVUQVUÃ7
1+
1-
2+
2-
H6DIÃS
x
x
HPIP
x
x
HPIP
x
x
7SD9B@
x
x
@VSPQPX@SÃQHY QHY"QHY$
Tab. 4.1: Polarity configuration of speaker connectors
OUTPUT B
OUTPUT A
+1
+1
-1
-1
8 Ω
4 Ω
8 Ω
4 Ω
BRIDGE
16 Ω
8 Ω
+1
+2
Fig. 4.6: SPEAKON
®
pin assignment