West Bend Back to Basics UX-CC500 - Manual (Page 52)

Operating the Answering System
50
4
Press to set a passcode.
(To clear a previously set passcode,
press .)
5
Enter the number of the personal box
for which you wish to set a passcode.
Example: for Box 1
(If you are clearing a passcode, enter
the number of the box and go to Step
7.)
6
Enter a 3-digit number for the passcode. The first digit of the number
must be 0, 5, 6, 7, 8, or 9.
7
Press .
8
Return to Step 5 to set another passcode, or press to return to
the date and time display.
1
2
1
START/MEMORY
STOP
ENTER PASSCODE
Note: If you wish to change a passcode, clear the passcode and then enter a
new passcode. If you forget a passcode, clear it and enter a new passcode.
ENTER BOX # (1-4)
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
until the arrow in the display points to TAD. (TAD stands for
“Telephone Answering Device”.)
RESOLUTION/
RECEPTION MODE
RESOLUTION/
RECEPTION MODE FAX TEL
TAD
ENTER BOX # (1-4)