BenQ M300 - Manual (Page 113)

Menus 99
„ CSD/GPRS: Use the dialup network preferentially. Only if
there is no dialup network will the GPRS network be used.
„ CSD: Use only the dialup network.
• GPRS: To modify settings for a GPRS account, press (Edit)
to edit the settings in each field. GPRS settings include the
following fields:
„ APN: Enter the APN (Access Point Name) assigned by your
network operator.
„ User Name: If needed, enter the user name provided by your
network operator.
„ Password: If needed, enter the account password provided by
your network operator.
• CSD: If you are using a GSM network, you must configure and
activate a CSD account. Press (Edit) to edit the settings in
the following fields:
„ Dial Number: When you start up the browser to connect to
the Internet, you phone will dial this number. Your telecoms
network operator or ISP will provide this number to you.
„ User Name: This is your user account name, and is provided
by your network operator.
„ Password: The account password provided by the network
provider.
/ A dialup network is a GSM Circuit Switch Data Service (CSD
for short). Using a dialup network can be likened to using a
home computer's modem, in that before connecting to the
Internet a number must be dialed. As for GPRS, it like the
LANs used at company, where users do not need to dial a
number to access the network. Regular GSM users who are
not using a GPRS network system can only have a dialup
connection to the Internet.