BenQ M300 User Manual
Page 80
66
Using Your Phone
How to use iTap
•
Press once the alphanumeric key corresponding to the first letter of
the word you wish to enter without considering where that letter falls
in the sequence of characters available through that key. Then press
the key corresponding to the second letter, and so forth. The phone
will predict which word you wish to enter based on the set of keys you
have pressed. The predicted word will be shown in the lower left
portion of the screen. This word may change as you continue to press
other keys; therefore, before you have entered a complete word, you
do not need to worry if the displayed word does not yet match the
word you intend to enter.
•
After pressing keys for a complete word, if the displayed word does
not match the one you intended to enter, press
to view other
candidate words and locate the desired word.
•
Once the correct word is displayed on the screen, press
to enter this
word. A space will automatically be inserted after the word.
•
While entering text, press
to move the cursor left or right; press
to move the cursor up or down. Press
once to delete a
character; long-press
to delete all entered text.
Example of iTap in use
To enter "COME HOME" in the message editing screen using iTap, use
the following steps:
1. Press
to switch to iTap for uppercase letters (ITAP).
2. Press
to select C, O, M, E.
3. Press
to enter "COME" as text. A space will automatically be
inserted after "COME".
4. Press
to enter "HOME".